10/100m DIN-Rail Mount Industrial Ethernet Switch
It is a managed Layer 2 + industrial Optical Ethernet switch with 3*1000Mbps SFP ports and 6*10/100Mbps electrical ports. It is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. It's high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. It also features powerful Web-based, CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial environment.
Key Features:
Ø       6x10/100BaseTX Ports + 3x1000BaseFX SFP Ports
Ø        OP Ring Protection (OPRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
Ø        8K address table for auto-learned unicast addresses
Ø       4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol   Â
(GVRP) for flexible network planning and management
Ø       Flexible load distribution control and fail-over function
Ø       Manual, static and dynamic port Static and dynamic port aggregation for bandwidth management
Ø       Port rate limit, broadcast storm control, port mirrring, rich Quality of Service (QoS) features for data traffic control and management
Ø       Black hole MAC address filtering, static and dynamic MAC address management for network security
Ø      Access Control Lists(ACL)
Ø       Secure Shell (SSH) v2.0
Ø        IGMP snooping
Ø       SNTP, SMTP
Ø       SNMP V1, V2c, V3
Ø       Supports RMON statistics, history, alarm and event
Ø       Web-based network management interface
Ø       Supports port and VLAN management
Ø        On-line firmware upgrade
Ø        Two privilege level accounts
Ø        Syslog
Ø        Dual power input for high reliability
Ø        DIN rail or panel mounting for easy installation
Performance:
Ø        IEEE Protocol:
Ø       802.3 10Base-T Ethernet
Ø       802.3u 100Base-TX and 100Base-FX fast Ethernet
Ø       802.3x Flow Control and Back Pressure
Ø       802.1p Class of Service
Ø       802.1Q VLAN Tag
Ø       802.3ad LACP
Ø       802.1D-2004 STP
Ø       802.1w Rapid STP
Ø       802.1s Multiple STP
Ø       802.1x
Ø        Non-blocking store-and-forward shared-memory switch architecture
Ø        MAC address:8K
Ø        Network management: Web-based, CLI, Telnet/serial console, windows utility and SNMP management.
Ø        OP Ring Protection: recovery time within 15ms
Ø        Firmware upgrade: Web, online
Port configuration:
| RJ45 Port | Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters. |
| Â 1000Base-FX Optical Port | SFP port |
| Single-mode | 20, 40, 60, 80,100, 120Km,optional, depend on your SFP module |
| Multi-mode | 2, 5Km ,optional, depend on your SFP module |
| Wavelength | 850nm, 1310 nm, 1550nm |
| DOWNLOAD PROGRAM Port | Based serial network management (RS-232), RJ45 |
| Alarm output interface | One relay alarm output. Support power, port link and ring network alarm |
| Â Indicator | Port link, ring fault/abnormity alarm indication 10/100/1000M Rate, run indication |
Power input options:
Ø        Input Voltage: 24VDC (18V~36V DC), Redundant double power input
Ø        Input Current:<0.24A@24VDC
Ø        Overload Current Protection
Ø        Support dual power backup
Ø        Support dual power alarm input
Ø        Connector: 6 pin terminal
Enviromental limit:
| Wide Temperature | 40°C ~+ 80°C |
| Storage Temperature | -40°C~+ 85°C(-40~185°F ) |
| Humidity | 5%~95% |
Mechanical Dimension:
| Dimensions | 60.5 x 118 x 140 mm |
| House Protection | IP40 protection, Aluminium Alloy |
| Installation | DIN-Rail or wall mounting |
| Weight | 760g |
| Warranty | 5 Years |
Approvals:
Ø        EMI: FCC Part 15 Subpart B Class A, CISPR (EN55022) class A
Ø        EMS:
EN61000-4-2 (ESD),Level 3
EN61000-4-3 (RS),Level 3
EN61000-4-4 (EFT),Level 3
EN61000-4-5 (Surge),Level 3
EN61000-4-6 (CS),Level 3
EN61000-4-8,Level 3
Ø        Shock: IEC 60068-2-27
Ø        Free Fall: IEC 60068-2-32
Ø        Vibration: IEC 60068-2-6Â
WOULD YOU LIKE SOME TRIAL ORDERS TO TEST THE MARKET?
*Before Sale Service:
We provide professional offer. Provide detailed products test report and related specifications.
We provide professional technology support to meet the requirements of customers.
Within 12 hours of the corresponding customer inquiry, our commissioners will promptly get in touch with the customers.
*After Sale Service:
Takfly Communications Co., Ltd. Is a Hi-Tech enterprise having its own brand and specializing in R&D, manufacture and sales of fiber optical communications equipments. If a material or workmanship defect arises and a valid claim is received within the warranty period, we will replace the items only and bear the shipping cost for both sides. We could not be held liable for damages to personal property due to misuse or improper care and maintenance of items. There is no fault rate for the items we delivered, if there is fiber optic equipment that does not work when you get it, just contact us. If we should be responsible for it after we test, we will replace it for you. We are equipped with the good after service department and never escape our responsibility.
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Â
Quality Control
All products must go through five checks before manufacturing process
Â
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Â
Advantage
1.15 years experience in manufacturing fiber optic products..
2.Availability of RÂ & DÂ with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent survice
Â
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
Packaging
1.All products will be packed in double corrugated carton , so the product can get effective protection to avoid damage.
2. Packaging according to customer requirementÂ
Shipping
1. We shipping via DHLÂ Â / FedEx /Â TNT/etc for samll orders. Yow can get your packages in about 3-5 days all over the world.
2. For big order, we will arrange Air cargo  for your shipment, so it will be much cheaper than DHL, UPS etc.
3. You can choose your own shipping agent, we will provide good cooperation for it.
After-Sales Service1. TAKFLYÂ can provide detail documents and remote help for device installation and configuration.
2. Warranty:Â 2Â year. (Â After the quality guarantee period began to charge appropriate maintenance service fee.)
3. TAKFLY promises goods enjoy full return due to quality problem since goods delivered within 7 days or 15 days , returned goods must keep original state and it's accessories are complete.
THANK YOU FOR YOUR BROWSING.
ANY QUESTIONS PLEASE CONSULTÂ me IMMEDIATELY!
LOOKING FORWARD TO YOUR INQUIRY.
HAVE A NICE DAY~Â :)
Â
It is a managed Layer 2 + industrial Optical Ethernet switch with 3*1000Mbps SFP ports and 6*10/100Mbps electrical ports. It is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. It's high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. It also features powerful Web-based, CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial environment.
Key Features:
Ø       6x10/100BaseTX Ports + 3x1000BaseFX SFP Ports
Ø        OP Ring Protection (OPRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
Ø        8K address table for auto-learned unicast addresses
Ø       4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol   Â
(GVRP) for flexible network planning and management
Ø       Flexible load distribution control and fail-over function
Ø       Manual, static and dynamic port Static and dynamic port aggregation for bandwidth management
Ø       Port rate limit, broadcast storm control, port mirrring, rich Quality of Service (QoS) features for data traffic control and management
Ø       Black hole MAC address filtering, static and dynamic MAC address management for network security
Ø      Access Control Lists(ACL)
Ø       Secure Shell (SSH) v2.0
Ø        IGMP snooping
Ø       SNTP, SMTP
Ø       SNMP V1, V2c, V3
Ø       Supports RMON statistics, history, alarm and event
Ø       Web-based network management interface
Ø       Supports port and VLAN management
Ø        On-line firmware upgrade
Ø        Two privilege level accounts
Ø        Syslog
Ø        Dual power input for high reliability
Ø        DIN rail or panel mounting for easy installation
Performance:
Ø        IEEE Protocol:
Ø       802.3 10Base-T Ethernet
Ø       802.3u 100Base-TX and 100Base-FX fast Ethernet
Ø       802.3x Flow Control and Back Pressure
Ø       802.1p Class of Service
Ø       802.1Q VLAN Tag
Ø       802.3ad LACP
Ø       802.1D-2004 STP
Ø       802.1w Rapid STP
Ø       802.1s Multiple STP
Ø       802.1x
Ø        Non-blocking store-and-forward shared-memory switch architecture
Ø        MAC address:8K
Ø        Network management: Web-based, CLI, Telnet/serial console, windows utility and SNMP management.
Ø        OP Ring Protection: recovery time within 15ms
Ø        Firmware upgrade: Web, online
Port configuration:
| RJ45 Port | Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters. |
| Â 1000Base-FX Optical Port | SFP port |
| Single-mode | 20, 40, 60, 80,100, 120Km,optional, depend on your SFP module |
| Multi-mode | 2, 5Km ,optional, depend on your SFP module |
| Wavelength | 850nm, 1310 nm, 1550nm |
| DOWNLOAD PROGRAM Port | Based serial network management (RS-232), RJ45 |
| Alarm output interface | One relay alarm output. Support power, port link and ring network alarm |
| Â Indicator | Port link, ring fault/abnormity alarm indication 10/100/1000M Rate, run indication |
Power input options:
Ø        Input Voltage: 24VDC (18V~36V DC), Redundant double power input
Ø        Input Current:<0.24A@24VDC
Ø        Overload Current Protection
Ø        Support dual power backup
Ø        Support dual power alarm input
Ø        Connector: 6 pin terminal
Enviromental limit:
| Wide Temperature | 40°C ~+ 80°C |
| Storage Temperature | -40°C~+ 85°C(-40~185°F ) |
| Humidity | 5%~95% |
Mechanical Dimension:
| Dimensions | 60.5 x 118 x 140 mm |
| House Protection | IP40 protection, Aluminium Alloy |
| Installation | DIN-Rail or wall mounting |
| Weight | 760g |
| Warranty | 5 Years |
Approvals:
Ø        EMI: FCC Part 15 Subpart B Class A, CISPR (EN55022) class A
Ø        EMS:
EN61000-4-2 (ESD),Level 3
EN61000-4-3 (RS),Level 3
EN61000-4-4 (EFT),Level 3
EN61000-4-5 (Surge),Level 3
EN61000-4-6 (CS),Level 3
EN61000-4-8,Level 3
Ø        Shock: IEC 60068-2-27
Ø        Free Fall: IEC 60068-2-32
Ø        Vibration: IEC 60068-2-6Â
WOULD YOU LIKE SOME TRIAL ORDERS TO TEST THE MARKET?
*Before Sale Service:
We provide professional offer. Provide detailed products test report and related specifications.
We provide professional technology support to meet the requirements of customers.
Within 12 hours of the corresponding customer inquiry, our commissioners will promptly get in touch with the customers.
*After Sale Service:
Takfly Communications Co., Ltd. Is a Hi-Tech enterprise having its own brand and specializing in R&D, manufacture and sales of fiber optical communications equipments. If a material or workmanship defect arises and a valid claim is received within the warranty period, we will replace the items only and bear the shipping cost for both sides. We could not be held liable for damages to personal property due to misuse or improper care and maintenance of items. There is no fault rate for the items we delivered, if there is fiber optic equipment that does not work when you get it, just contact us. If we should be responsible for it after we test, we will replace it for you. We are equipped with the good after service department and never escape our responsibility.
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Â
Quality Control
All products must go through five checks before manufacturing process
Â
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Â
Advantage
1.15 years experience in manufacturing fiber optic products..
2.Availability of RÂ & DÂ with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent survice
Â
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
Packaging
1.All products will be packed in double corrugated carton , so the product can get effective protection to avoid damage.
2. Packaging according to customer requirementÂ
Shipping
1. We shipping via DHLÂ Â / FedEx /Â TNT/etc for samll orders. Yow can get your packages in about 3-5 days all over the world.
2. For big order, we will arrange Air cargo  for your shipment, so it will be much cheaper than DHL, UPS etc.
3. You can choose your own shipping agent, we will provide good cooperation for it.
After-Sales Service1. TAKFLYÂ can provide detail documents and remote help for device installation and configuration.
2. Warranty:Â 2Â year. (Â After the quality guarantee period began to charge appropriate maintenance service fee.)
3. TAKFLY promises goods enjoy full return due to quality problem since goods delivered within 7 days or 15 days , returned goods must keep original state and it's accessories are complete.
THANK YOU FOR YOUR BROWSING.
ANY QUESTIONS PLEASE CONSULTÂ me IMMEDIATELY!
LOOKING FORWARD TO YOUR INQUIRY.
HAVE A NICE DAY~Â :)
Â
Online UPS,High Frequency UPS,PFC Technology,Tower Cabinets
Shenzhen Unitronic Power System Co., Ltd , https://www.unitronicpower.com