Can 360 Secure Routing 2 again create sales myths?

product description

For 360 starting from security protection, everyone must be very familiar with it. In China, almost all operating systems have been infiltrated by it. Routers, as the basic hardware of the network, have also been occupied by 360. In the first half of 2016, the 360 ​​security routers were the best ones for smart routing sales. The 2nd generation to be introduced today is a new product that has just been listed on April 27, 2017. Currently, there are nearly 2,000 units sold in Jingdong.

Because it is the starting product, it also comes with a bag for the conference. Does it mean that you have just attended the press conference?

Because 360 ​​smart devices are mostly sold on the Internet, there is also a protective carton suitable for transport in the outer packaging, which can effectively reduce the risk of shipping damage.

The second-generation packaging box is indeed very large, and the paper box is very thick. The word “security” reflects not only the technology.

The new model: 360P3; CPU: RTL8197FH + RTL8812BRH frequency 1G (said this combination supports MU-MIMO technology); Memory: DDR128M; ROM: 16M. As always, 360's smart routing manufacturers are still Shenzhen Fenglian Technology (Lecore Netcore).

Four antenna design, but still 6dBi omnidirectional, I feel this power is not small, oh.

Only the main unit, power supply, and manual are included in the box, and no special network cable is provided with the package.

The power supply is also a router universal type: 12V 1.5A, large size, if used on a patch panel, it is expected to occupy a larger position, the power cord is inseparable,

The antenna is long and flat, and it cannot be disassembled. It can stand still and stay upright, with the appearance of the router rising upward.

The antenna can be adjusted in two steps. Of course, in order to obtain the best signal, it is recommended to use a full vertical angle.

The bottom of the router is the same as the antenna. It is a pure white ABS plastic material. The four feet are equipped with a protruding rubber pad to allow the bottom cooling holes to function well. There are no openings to support mounting.

P3 provides a Gigabit WAN port to solve the bottleneck of 200M broadband access 100M port; but the 100M LAN is really a bit embarrassing, but fortunately, there are not many devices that are currently used by the routed wired connection, and the 5G band can be used. Make up for it; USB 2.0 is weaker, but it's better than nothing. You can build a small data-sharing center.

There are nine LED lights on the panel corresponding to the interface or function. The sapphire blue color can be turned off periodically in the route setting to solve the problem of night light pollution. Of course, it can also save energy.

The routing panel adopts a rounded double-sided aluminum alloy design to protect the chips in the router and can effectively solve the heat dissipation problem and shield signal interference. After one day of use, the rough surface temperature of the routing was about 25.8°C, which was very close to the ambient temperature. There was no obvious thermal sensation when it was touched by hand.

Configuration use

After connecting the network cable as required, you can directly connect to the WiFi and configure it in the mobile phone browser. Because there are more wireless devices in the home, the SSID is set to be the original and convenient to use. There are still some distances from the "2-step installation, teaching parents" experience of the propaganda picture. Taking this as a propaganda does not make much sense. After all, it does not need to be revised.

After the configuration is complete, the login management interface (in fact, the same as the PC side), rich set of features, almost all of the features you may have.

After the APP is installed, the newly accessed P3 can be automatically detected and bound to the management. First-time use can also get a chance to draw, the prize is iPhone7, I got a network cable, free, better than nothing. The event ended on May 15th. Students with P3 routings won the prize.

After the route is bound, the APP can directly manage the route. The route management interface provides three tabs, “Speed ​​Management, Utility, and Route Settings”. Due to the replacement of the router, the previously set expander loses contact. During the test, each time the device is replaced or the host route is restarted, the expander is lost.

There is no suspense, the first use must upgrade the firmware, which also shows that there are many room for improvement in the new product. On the APP side, you can also clearly see the hardware configuration of the router. It is transparent and frank. I feel that this approach is quite authentic.

The main interface can freely set the background image, name the usage scene, provide commonly used 4 functions, and can also set the smart device to access. If you have more than 360 smart devices, this function is very practical.

360 Smart Butler App provides four tabs for "Family, Security, Discovery, and My." Security is the main function of the 360 ​​router. In this tab, you can perform a comprehensive security check on the device. This is a very convenient operation. The Discovery tab provides smart device-related information. The last tab is for some common information about accounts, feedback, and software.

The functions of the PC are richer and more powerful. The above figure will roughly show the functions of each interface. I will show you the highlights of the color.

Special feature

Security is the main concept of 360 routing. In the management page, it provides a very rich security protection items: malicious website firewall, Internet hijacking firewall, home network firewall, password security firewall, the user's Internet behavior is monitored and protected in real time, for the user , as long as the use of 360 routing can be free for life.

Friction Internet access has been introduced in P1, allowing visitors to use the owner's home network without passwords. It requires only a small amount of friction to protect the privacy of the home network and avoid the risk of being dragged away (My family's visitor network has always been Open and no password, welcome to my home network).

The child protection function is the most practical for personal feelings. There are old people in the family who often play WeChat and forget about sleeping time (which is not easy to say face to face). Children needless to say, often bargaining and playing games for a while (It is estimated that bear children are like this. Bar). With this feature, the problem is easily solved. Have a good rest time with the old man in advance so that his device can access the Internet only during the allowed time. This not only does not require frequent reminders, but also avoids mutual incomprehensibility. For bear children, this method works equally well and can be treated differently. Boys and girls, set the interface very human.

The USB2.0 interface provided by 360 Secure Routing 2 can form a small NAS. The PC can be accessed via \\192.168.0.1 and can write or read data at any time.

The APP can only view the storage space of the USB interface and cannot directly write data. Of course, in the same local area network, when using other APPs, the content stored externally to the USB interface can be read through the DLAN mode.

The APP can use the photo backup function. It can backup the mobile phone album to the USB storage, and it can be displayed by months in chronological order. Backup and viewing are very convenient. If your mobile phone is relatively small, this function can definitely help you. .

WiFi strength test

As a router, the strength and stability of the signal is a key concern for the user. "360 Secure Routing 2" provides three kinds of strengths of WiFi mode, and can automatically switch WiFi intensity at regular intervals. The above figure shows the signal intensity values ​​of the three modes (within 10 cm between the phone and the router during the test). Obviously, whether the 5G or 2.4G signal is very strong, and in addition to the national standard -20dBm, except for "pregnant women "The model basically conforms to the national standard. The other two models are not in compliance with the requirements of environmental protection. Long-range and close reception of such strong radiation may be detrimental to health. Although the 6dBi antenna enhances the signal strength, it also increases the radiation risk accordingly.

Since there is a "through wall" mode, then continue to test the signal performance of each point.

In the same layer of 5 different test points, the 2.4G signal can be basically stable and efficient, and the 5G signal is weak in the bathroom, but it can still be used happily. From a health point of view, go to the toilet or do not race against time to play mobile phones.

Continue upstairs to test the performance of the game.

After the jump, there is almost no 5G signal, and the 2.4G signal is obviously weakened, but it remains in a usable state. In order to make the upstairs network more secure and stable, I added a 360 signal extender in practical use. .

In summary, the WiFi signal is strong, the radiation is large, the signal coverage is wide, and the use of dead angle is less, but occasionally there is no data connection, and the support for some devices is not high.

Internet speed test

Test one: access to China Mobile Gigabit network, set the public network fixed IP directly on the router

360 intelligent routing 2 comes with a speed measurement tool, first in the routing management page to test, the results can be very unsatisfactory, may be routing built-in speed point without China Mobile's server.

Connect the server to the LAN of the router and use speedtest to measure the speed. From the test results, 100Mbps LAN port can basically run full speed, and the stability of the router's data transmission is still very good, wired mode is not fast and sometimes slow, no Gigabit LAN port is a big pity.

Continue to use the 360 ​​security guards built-in speed measurement tool, continuous testing 5 times, but also full-speed rhythm, it can be said that this section of the router's cable performance is very good, which has a great relationship with the routing hardware configuration.

The same network environment continues to use the phone for speed measurement. It may be because the mobile phone works in the 802.11g mode, so 2.4G only reaches the downlink connection rate of close to 50M, and there is no big breakthrough in the uplink; the situation of the 5G signal is relatively more ideal, the downlink rate is close to 300M, and the uplink is even more Close to 200M, it can be said that such a rate is more than enough for a mobile terminal playing a game watching a movie. The results of the 5G test can well prove that the statement that “Gigabit WAN ports are useless” is a bit extreme.

Test two: access to China Telecom 100M home broadband

Using the router's own speed measurement tool, you can run through the bandwidth allocated by telecommunications. Comparing the previous results, it is estimated that 360 router 2's own test speed points are only telecommunications and Unicom, and there should be no other ISP speed points.

The same working environment, through the wired LAN connection route, open speedtest to test, and the routing comes with the test results are very close to the basic can run the limit of the route, 100M and below broadband users is certainly not a big problem, but for 200M broadband users In fact, the bandwidth of a single terminal can only be 100M.

Continue to use mobile phones to test the speed performance of WiFi connections. The 2.4G mode still can only reach about 45M, indicating that the data transmission between the mobile phone and the router is actually through the 802.11g protocol; the 5G mode can still run close to 100M downlink, I believe, If I am 200M broadband, this downlink value will certainly be close to 200M. The existence of Gigabit WAN ports is not a chicken rib. Especially when multiple terminals require large downlinks at the same time, the role of the Gigabit WAN port is even more obvious.

Stability test

In actual home use, because I have more terminals (more than 20 terminals are fully open), I am basically stable in the state of 15 wireless terminals being online at the same time. In this state, I use the notebook to pass the 2.4G mode. , Often there will be particularly slow or no data, so I specifically tested the performance of network stability.

1. Through the wired connection, the ping value is very stable, and there are occasions where the response is slower for 1-2 times. There is no problem with the cable, and it is within the acceptable range.

2. The notebook and the router are in the same position (without any obstacles and less than 1 meter apart). Instead of using 2.4G access, the ping value does not appear to be lost. However, the response is significantly slower. The average time is 19 ms, which is lower than the wired mode. A lot.

3. The partition uses 2.4G (the C position of the previous speed measurement point). This time, it cannot be read at all. The average response value reaches 60ms. Is it because my network card does not match the 360 ​​routing protocol?

Then, to the 2.4G setting of the router background, the channel bandwidth of 40M is selected, but it is still unable to obtain a stable connection state. Although the signal is in a full-lattice state, the connection rate is very low, and even a stable connection at 5.5M for a long time rate. Trying to kick off some devices that are connected via 2.4G still fails to solve this problem.

In order to better express the change of the connection status, I have shown the development of the status of the wireless connection as a four-phase diagram. It can be clearly seen that with the increase of connection time and transmission data, the 2.4G connection is always full (notebooks and routers have not been moved), but the actual connection rate is decreasing until the final drop. The connection rate to 5.5Mbps, and can no longer be improved. According to my assumptions, the existence of this phenomenon should be related to certain security policies that come with routing. It is hoped that the authorities can do further verification and upgrade firmware later in the process.

Trial summary

advantage:

1, the appearance of beautiful, especially the introduction of the metal cover, in addition to enhancing the value of the beauty, but also enhance the cooling capacity of the device;

2, RTL8197FH low heat, support MU-MIMO technology, speaking from the hardware platform, has a certain degree of advancement;

3, Gigabit WAN port equipped, can effectively play more than 100M broadband efficiency;

4. The introduction of USB interface facilitates users to create small private cloud storage;

5, powerful security features, all kinds of advanced features you want can be found on this device;

6. The function of child protection is very good. It can be convenient for managing the time for the elderly or children to use the Internet and develop a good habit of healthy surfing.

Short board:

1. There is no Gigabit LAN port (even if only one is OK), which brings certain limitations to wired LAN transmission.

2, USB2.0 transmission rate is low, high-end users certainly need 3.0 interface to build their own NAS;

3, support for some wireless network cards is not good enough, the connection rate is low;

4, the stability of the wireless connection is not good enough, packet loss, intermittent phenomenon is more common, affecting the experience;

5, WiFi signal power is too strong, there is a certain radiation risk.

The rapid development of the Internet, the popularity of 100M broadband, your home's routing also need to do some upgrade? Currently, broadband providers will affiliate with non-intelligent Gigabit routers such as TP-Link when they upgrade 200M broadband. The price is between 400-500. If you understand 360 Smart Routing 2 in advance, are you willing to pay for the price of 199? ? Do you mind about the bottleneck of the 100M LAN port? Or is it attracted by a wealth of security and simple smart features? ... From my personal point of view, this section of the route is suitable for users who don't have tossing the home network. Both the security and the function can meet the daily needs, and the price of 199 is quite competitive. It can be said that A rare, cost-effective smart router. Of course, the market is still the user's final say, if you do not need those fancy features, you can use the traditional Gigabit routing to play 200M performance.

Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.

Balanced Orifice Plate Flowmeter

Balanced Orifice Plate Flowmeter is one of orifice plate, and is actually a flow rectifier, can effectively eliminate swirl and distorted velocity distribution improvements.

Balanced flow meters are recent additions to an established class of simple, rugged flow meters that contain no moving parts in contact with flow and are based on measurement of pressure drops across objects placed in flow paths. These flow meters are highly accurate, minimally intrusive, easily manufacturable, and reliable.

Balance Flowmeter,Diesel Flow Meter,High Flow Oxygen Flow Meter,Chemical Industrial Orifice Flow Meter

Kaifeng Chuangxin Measurement & Control Instrument Co., Ltd. , https://www.kfcxflowmeter.com