High Energy Saving T8 9W, 14W, 18W, 24W LED Fluorescent Tube

Specifications:

*Model:LED tube
*Optional Wattage:9W,14W,18W,24W
*Optional Base:G13
*CCT(K):2700K,4200K,6500K
*Lifespan:30000Hrs
*Warranty:2 years
*Meet EUP05 standards

*Our CFL&LED lighting models produced in accordance with the European directives EMC directive 2004/108/EG,Low voltage directive 2006/95/EG,ROHS directive
2002/95/EC and in accordance with the European standard in their latest revised version.
Specifications:

*Model:LED tube
*Optional Wattage:9W,14W,18W,24W
*Optional Base:G13
*CCT(K):2700K,4200K,6500K
*Lifespan:30000Hrs
*Warranty:2 years
*Meet EUP05 standards

*Our CFL&LED lighting models produced in accordance with the European directives EMC directive 2004/108/EG,Low voltage directive 2006/95/EG,ROHS directive
2002/95/EC and in accordance with the European standard in their latest revised version.

Single Phase Isolation Transformer

Generally included
Single Phase Isolation Transformer,Isolation Transformer,Auto Transformer,Single Phase Electrical Transformer

Characteristic

1. Anti interference effect: if the isolation transformer connected with Y/â–³ can prevent the transmission of some harmonics;
2. Impedance transformation function: increase the system impedance, so that the protection device can be easily matched;
3. Function of stabilizing system voltage: for example, when starting heavy load equipment, reduce the impact on system voltage;
4. Function of preventing system grounding: when single-phase grounding occurs on the load side of the isolation transformer, it will not cause single-phase grounding of the whole system (above the Satons isolation transformer);
5. Reduce short circuit current: limit the short circuit current of the system when a short circuit accident occurs on the load side.

DG (B) /BK series single-phase isolation transformer can not only change the voltage, but also electrically isolate the input winding and output winding from each other, so as to avoid the danger caused by touching electrified body (or metal parts that may be electrified due to insulation damage) and ground at the same time. In addition, the isolation transformer also has the function of restraining various inter ferences.
Product performance
Input voltage 220v can be customized according to requirements, and output voltage 110v, 127v, 200v, 208v can be customized according to requirements Voltage stabilization accuracy ± 1% Output no-load current ≤ 2% Frequency 50hz/60hz Withstand voltage 2m Ω Waveform harmonic 1500v Voltage 1 min No breakdown and flash over Withstand voltage f Maximum temperature rise 150 ℃

Single Phase Isolation Transformer,Isolation Transformer,Auto Transformer,Single Phase Electrical Transformer

Henan New Electric Power Co.,Ltd. , https://www.newelectricpower.com