Electromagnetic induction heating equipment is an environmental protection equipment advocated by today's energy conservation and environmental protection, and is deeply loved by the heating industry. This is because the energy-efficient electromagnetic induction heater device is a new type of heating energy-saving product, which has remarkable power saving effect, fast heating speed, high thermal efficiency, low production environment temperature, maintenance-free and other remarkable features, and the original production process and operation. The program has no influence or change. Therefore, it is widely used in plastic processing and similar heating industries.
Electromagnetic induction heating equipment users are used to abbreviated as electromagnetic heaters. Most of them know that it heats up quickly and can save electricity. However, there are still some concerns about the actual operation. So, how do you set the display mode of the electromagnetic induction heater? Here is the introduction of Shenzhen Zenen (zenen):
After the electromagnetic heater is powered on, the default display gear position is the highest, and the gear position indicator is on. When the left and right buttons are pressed, the display mode can be switched. From left to right, the order is: frequency, temperature, current, voltage and gear position. As the light changes, the digital tube will display the corresponding parameter value when it is switched to a mode.
1. Frequency: Display the oscillation frequency of the electromagnetic heating coil during operation. It can be judged whether the coil is suitable by observing the frequency value;
2. Temperature: Under normal configuration, the temperature of the heat sink is displayed; if the type K thermocouple or infrared temperature measurement function is selected, the temperature of the thermocouple or infrared detection is displayed. Press the up and down keys to display the set temperature, and return to real time after 3 seconds. measure temperature.
3. Current: Display the working power input current.
4. Voltage: Display the working power input voltage.
5, electromagnetic induction heating equipment gear position: display gear position, press the up and down keys to adjust the power, no gear type or rheostat power adjustment type of up and down keys is invalid; if selected K type thermocouple or infrared temperature measurement function, display constant temperature Parameters, press the up and down keys to adjust this parameter.
AC Contactor switch mainly used for making or breaking circuit at a long distance, suitable for controlling starting\stopping\reversing of AC motor. AC Contactor of korlen conforms to the requirement of IEC60947-4-1& GB14048.4 standards.
Except AC Contactor, there are many different types of low voltage electric appliances, such as Thermal Relay,Manual Motor Startor ,led light, Circuit Breaker, etc.
AC Contactor,Magnetic Contactor,Wafer Style Valve
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmannualmotorstarter.com