It is inevitable that the magnetic separator equipment will encounter faults during use. It is the key to learn to handle the loss to the minimum.
In the long-term production, the magnetic separator is prone to overheating of the reducer. At this time, we must first determine whether the oil quality used is no problem, and then check if the oil is insufficient. If the gears and worms of the magnetic separator machine wear over the base, or if the meshing is not good, the overheating of the reducer will occur. In addition, the magnetic field strength is easy to reduce for magnetic separator equipment that is used for a long time or whose quality is not good. This may also be caused by long-term exposure or corrosion of the machine. We need to measure the magnetic field of the magnetic separator. If it is too low, It needs to be magnetized. In addition, because the operator does not develop good habits or the maintenance is not in place, it often causes rust stains on the surface of the magnetic separator drum or the bearing surface. This situation should be dealt with in time, otherwise it will accelerate the aging of the equipment. Normal production. We can polish it with sandpaper first, apply it with insulating varnish after cleaning, and do rust and corrosion protection in the subsequent use.
Multifunctional Universal Matching Learning Remote Control
Shenzhen Chaoran Technology Corp. , https://www.chaoran-remote.com