SGS Audited China Supplier 7m Solar Street Light Pole

Jiangsu Street Lighting Pole prices of Steel Pole manufacturer 4m, 5m, 6m, 8m, 10m, 12m high
FEATURES
Hot galvanized street light post
Good looking street lighting poles
Customized powdered painting
3m 4m 5m 6m 8m 9m 10m 12m
WE ARE MANUFACTURER SINCE 1998
Experience: Our company was set up in 1998, having over 15 years of production experience in galvanized street light poles.
Production Capacity: We manufacture galvanized street light poles from 3M-35M at the capacity of 20, 000 poles per month.
Production lines: For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.

SPECIFICATION

Material
High-quality steel Q235/SS400 from BAOSTEEL Group
Welding Technique
Automatic submerged arc welding
Surface Treatment
Hot dip galvanizing and powder painting
Welding Standard
GB11345 Grade II
Thickness of Zinc Coating
≥ 86um
Adhesive Force of Zinc Coating
GB2694-88
Anti-wind Capacity
36.9m/s
Anti-corrosion Lifetime
≥ 20 years
Coating Layer
Thickness
≥ 100um
Adhesive force
GB9286-880
Hardness
≥ 2H
Steel Pole Height Options
3.5m~15m
Street Lighting Poles Type Options
Conical, polygonalDelivery Time
Generally 20 working days for 100 galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. Welding line--polishing line--spray painting line--packaging line

Solar Street Light Details
 
 
 
A GRADE high efficient solar panel
 
Mono: 18% convert efficiency
 
Poly:  17% convert efficiency
 
5 years warranty for solar panels
 
 
 
USA BRAND LED and Aluminum Section Bar Light Fixture
 
LED: BRIDGELUX/CREE
 
Long life time: 1W LED with 1 heat sink, fast heat dissipation makes it 100,000 hours long life time 
 
 
 
STRONGER POLE with 20 years life time 
 
Larger diameter: our pole is 10% larger in diameters
 
Thicker wall: we offer 0.25mm thicker pole than that of the market. For example, we offer 3mm thickness for 6m pole, while other, 2.5-2.75mm
 
Bigger foundation kits: for example, we offer M18-20*1000mm bolts for 6m light, while others, M16-18*800mm
 
Thicker zinc galvanization and painting: we offer 100 μm zinc and coating than the standard 80 μm
 
 
 
TWO TIMES rainy day backup waterproof controller 
 
Rainy day backup: 2 times more rainy day backup, savings in battery 
 
Combined LED driver and controller as one, easy to maintain
 
IP67: ideal for high humidity and dust areas
 
Energy saving mode: THREE periods of power adjustment available
 
All metal shell: high strength and fast heat dissipation, giving long life time 
 
 
 
UL LISTED GEL battery
 
Long service life (1600 cycles @ 30% DOD) 
 
Better Weather-ability (-20 ºC ~ 50 ºC) 
 
Fully sealed construction 
 
  Jiangsu Street Lighting Pole prices of Steel Pole manufacturer 4m, 5m, 6m, 8m, 10m, 12m high
FEATURES
Hot galvanized street light post
Good looking street lighting poles
Customized powdered painting
3m 4m 5m 6m 8m 9m 10m 12m
WE ARE MANUFACTURER SINCE 1998
Experience: Our company was set up in 1998, having over 15 years of production experience in galvanized street light poles.
Production Capacity: We manufacture galvanized street light poles from 3M-35M at the capacity of 20, 000 poles per month.
Production lines: For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.

SPECIFICATION

Material
High-quality steel Q235/SS400 from BAOSTEEL Group
Welding Technique
Automatic submerged arc welding
Surface Treatment
Hot dip galvanizing and powder painting
Welding Standard
GB11345 Grade II
Thickness of Zinc Coating
≥ 86um
Adhesive Force of Zinc Coating
GB2694-88
Anti-wind Capacity
36.9m/s
Anti-corrosion Lifetime
≥ 20 years
Coating Layer
Thickness
≥ 100um
Adhesive force
GB9286-880
Hardness
≥ 2H
Steel Pole Height Options
3.5m~15m
Street Lighting Poles Type Options
Conical, polygonalDelivery Time
Generally 20 working days for 100 galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. Welding line--polishing line--spray painting line--packaging line

Solar Street Light Details
 
 
 
A GRADE high efficient solar panel
 
Mono: 18% convert efficiency
 
Poly:  17% convert efficiency
 
5 years warranty for solar panels
 
 
 
USA BRAND LED and Aluminum Section Bar Light Fixture
 
LED: BRIDGELUX/CREE
 
Long life time: 1W LED with 1 heat sink, fast heat dissipation makes it 100,000 hours long life time 
 
 
 
STRONGER POLE with 20 years life time 
 
Larger diameter: our pole is 10% larger in diameters
 
Thicker wall: we offer 0.25mm thicker pole than that of the market. For example, we offer 3mm thickness for 6m pole, while other, 2.5-2.75mm
 
Bigger foundation kits: for example, we offer M18-20*1000mm bolts for 6m light, while others, M16-18*800mm
 
Thicker zinc galvanization and painting: we offer 100 μm zinc and coating than the standard 80 μm
 
 
 
TWO TIMES rainy day backup waterproof controller 
 
Rainy day backup: 2 times more rainy day backup, savings in battery 
 
Combined LED driver and controller as one, easy to maintain
 
IP67: ideal for high humidity and dust areas
 
Energy saving mode: THREE periods of power adjustment available
 
All metal shell: high strength and fast heat dissipation, giving long life time 
 
 
 
UL LISTED GEL battery
 
Long service life (1600 cycles @ 30% DOD) 
 
Better Weather-ability (-20 ºC ~ 50 ºC) 
 
Fully sealed construction 
 
 

1.27mm Male Header

1.27mm (0.05") Pitch Pin Headers
Antenk offers a variety of high quality and competitively priced 1.27mm pitch single,dual, three and quad row pin (male) headers used in many board-to-board PCB connections, fitting small-sized, densely-packed devices.

This low-profile component is made from high-temperature thermoplastic and is offered with several means of connections and mounting styles such as through-hole (THM) or surface mount (SMT) and can be in vertical (straight), elevated or at a right angle configuration/orientation dissipating current of about 1.0 A or less.

The pin (male) header is generally mated with receptacle or stackable header connectors (female sockets). This types of pin headers are suitable for PCB board to board connection or for signal transmission application.

Applications of 1.27mm Pitch Pin Headers
Small equipment and devices can highly benefit from the small but robust stature of the 1.27mm pitch pin header as its material is tested for high-vibration and shock requirements of the automotive, industrial, and consumer electronics industries. This 1.27mm pitch pin header is widely used in diverse applications such as:
Medical Diagnostic and Monitoring equipment
Communications: Telecoms and Datacoms
Industrial and Automotive Control and Test
Retail and Point-Of-Sale equipment
Mil/Aero and Home Security
Solar applications
Weighing systems
Vehicle infotainment
Computer peripherals
Telecommunications
Heart monitors

Mount Type:
Through-hole vs Surface Mount
1.27mm pitch pin (male) headers are offered in either Surface-mount or Through-hole mount termination. At one side of this pin header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).

Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.

Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
1.27mm vertical single row header, 1.27mm vertical dual row header, 1.27mm Elevated single row pin header, 1.27mm Elevated dual row pin Header, 1.27mm Right-angle single row header and 1.27mm Right-angle dual row header are some
examples of Antenk products with through-hole mount type.

Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
1.27mm Right-angle Dual Row pin header, 1.27mm SMT Single row pin header, 1.27mm SMT Dual row pin header and 1.27mm Elevated Dual Row Pin Header are Antenk`s SMT pin headers.
Soldering Temperature for 1.27mm Pitch Pin Headers
Soldering SMT pin connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.

Pin-Type:
Vertical (Straight) and Right-Angle
1.27mm pitch headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle male header.

Vertical or Straight Pin (Male) Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or..

Right-Angle Pin (Male) Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.

PCB Connector Stacking
Elevated Pin Header Orientation
Elevated pins aka Stacked Pins or Mezzanine are simply stacked pin headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.

Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.

Single, Dual or Multiple Number of Rows
For a 1.27mm straight or vertical male pin header, the standard number of rows that Scondar offers ranges from 1 to 2 rows. However, customization can be available if 3, 4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-50 pins while for dual row, the number contacts may vary from 4-100 pins.

Pin Material
The pins of the connector have been designed with copper alloy. With customer`s demand the pins can be made gold plated.

Breakaway design
The pin headers are also equipped with a breakaway design making them fully compatible with their female receptacles.

Custom 1.27mm Pitch Pin Headers
Customizable 1.27 mm pitch pin headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.

Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple numbers of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offers a range of custom Tape and reel carrier strip packaging cavities.

Pin Header Connector,1.27Mm Male Header,1.27Mm Male Header Pins,1.27Mm Pin Header Connector,0.05in Male Header,1.27mm SMT (Surface Mount) pin header,1.27mm Right-angle (Through hole) pin header

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com