Japan's D-CLUE Technologies has developed a power amplifier for mobile WiMAX terminal transmission circuits with up to 25% power added efficiency (PAE), which will begin sampling in October 2008.
The power added efficiency is as high as 25% when the amplifier transmit power is 24 dBm required by the mobile WiMAX terminal. At this time, 2.5% modulation accuracy (EVM) can be ensured, and high efficiency can be maintained even when applied to multi-value modulation such as 64-value QAM. In general, the power amplifier of a mobile WiMAX terminal has a low power addition efficiency of only about 10% to 15%. The reason is that the uplink uses OFDM, which requires high linearity of the power amplifier, and the result is that power added efficiency is sacrificed. Due to the low efficiency, there is a lot of unnecessary power consumption on the transmitting circuit, which may cause problems such as short battery driving time.
Imported bias control technology D-CLUE This product development power efficiency is 5 to 10 percentage points higher than the previous product, which can reduce the power consumption of the terminal transmission circuit. To improve power-added efficiency, the product uses a technique that optimizes the current bias and voltage bias inside the control amplifier in real time based on the transmitted signal. The company calls it "HiPAE technology." In a circuit in which OFDM modulation is applied to an uplink such as a mobile WiMAX terminal, the technology can reduce power consumption. The manufacturing process uses SiGe technology. In addition, some overseas manufacturers have also indicated that PAE has reached 25%, but most of them do not explicitly disclose the characteristics when using high-order modulation.
The power amplifier developed this time is called "DC12 Series". The power supply voltage is 3.3V, the output current is 300mA at an output power of 24dBm, and the gain is 30dB. There are two types for 2.5GHz frequency and 3.5GHz frequency. The package is a 4mm square QFN. The sample price is 1,000 yen. Mass production will be available in the first quarter of 2009.
The products will be supplied to major customers in the order of North America, Taiwan, and then Japan. In addition to the power amplifier for mobile WiMAX, D-CLUE will introduce this high-efficiency technology into LTE products and continue to develop it. (Reporter: Peng Tian Hongshu) Japan D-CLUE Technologies has developed a power amplifier for mobile WiMAX terminal transmission circuits with a power added efficiency (PAE) of up to 25%. Samples will be available in October 2008.
The power added efficiency is as high as 25% when the amplifier transmit power is 24 dBm required by the mobile WiMAX terminal. At this time, 2.5% modulation accuracy (EVM) can be ensured, and high efficiency can be maintained even when applied to multi-value modulation such as 64-value QAM. In general, the power amplifier of a mobile WiMAX terminal has a low power addition efficiency of only about 10% to 15%. The reason is that the uplink uses OFDM, which requires high linearity of the power amplifier, and the result is that power added efficiency is sacrificed. Due to the low efficiency, there is a lot of unnecessary power consumption on the transmitting circuit, which may cause problems such as short battery driving time.
Imported bias control technology D-CLUE This product development power efficiency is 5 to 10 percentage points higher than the previous product, which can reduce the power consumption of the terminal transmission circuit. To improve power-added efficiency, the product uses a technique that optimizes the current bias and voltage bias inside the control amplifier in real time based on the transmitted signal. The company calls it "HiPAE technology." In a circuit in which OFDM modulation is applied to an uplink such as a mobile WiMAX terminal, the technology can reduce power consumption. The manufacturing process uses SiGe technology. In addition, some overseas manufacturers have also indicated that PAE has reached 25%, but most of them do not explicitly disclose the characteristics when using high-order modulation.
The power amplifier developed this time is called "DC12 Series". The power supply voltage is 3.3V, the output current is 300mA at an output power of 24dBm, and the gain is 30dB. There are two types for 2.5GHz frequency and 3.5GHz frequency. The package is a 4mm square QFN. The sample price is 1,000 yen. Mass production will be available in the first quarter of 2009.
The products will be supplied to major customers in the order of North America, Taiwan, and then Japan. In addition to the power amplifier for mobile WiMAX, D-CLUE will introduce this high-efficiency technology into LTE products and continue to develop it. (Reporter: Peng Tian Hongshu) Japan D-CLUE Technologies has developed a power amplifier for mobile WiMAX terminal transmission circuits with a power added efficiency (PAE) of up to 25%. Samples will be available in October 2008.
The power added efficiency is as high as 25% when the amplifier transmit power is 24 dBm required by the mobile WiMAX terminal. At this time, 2.5% modulation accuracy (EVM) can be ensured, and high efficiency can be maintained even when applied to multi-value modulation such as 64-value QAM. In general, the power amplifier of a mobile WiMAX terminal has a low power addition efficiency of only about 10% to 15%. The reason is that the uplink uses OFDM, which requires high linearity of the power amplifier, and the result is that power added efficiency is sacrificed. Due to the low efficiency, there is a lot of unnecessary power consumption on the transmitting circuit, which may cause problems such as short battery driving time.
Imported bias control technology D-CLUE This product development power efficiency is 5 to 10 percentage points higher than the previous product, which can reduce the power consumption of the terminal transmission circuit. To improve power-added efficiency, the product uses a technique that optimizes the current bias and voltage bias inside the control amplifier in real time based on the transmitted signal. The company calls it "HiPAE technology." In a circuit in which OFDM modulation is applied to an uplink such as a mobile WiMAX terminal, the technology can reduce power consumption. The manufacturing process uses SiGe technology. In addition, some overseas manufacturers have also indicated that PAE has reached 25%, but most of them do not explicitly disclose the characteristics when using high-order modulation.
The power amplifier developed this time is called "DC12 Series". The power supply voltage is 3.3V, the output current is 300mA at an output power of 24dBm, and the gain is 30dB. There are two types for 2.5GHz frequency and 3.5GHz frequency. The package is a 4mm square QFN. The sample price is 1,000 yen. Mass production will be available in the first quarter of 2009.
The products will be supplied to major customers in the order of North America, Taiwan, and then Japan. In addition to the power amplifier for mobile WiMAX, D-CLUE will introduce this high-efficiency technology into LTE products and continue to develop it. (Reporter: Peng Tian Hongshu)
Nintendo Switch Crystal Case
Antiskid Switch console protective case enclosure for Nintendo
Features:high quality material,Humanization design,much better protection for Switch
(console and joy-cons excluded), Can plug into console dock with Super Slim case on console and joycons
-
Fit into Switch Dock with the Case - You do not need to remove the case when your Switch is in the dock. It is very convenient for you to use the dock frequently. The game console still charges in the cradle with the case on.
-
Protective Accessories For Nintendo Switch - Durable Nintendo switch case and screen protector protect your Switch from scratches, smudges, marks and dropping. We offer front cover and bottom protection for Joy-cons. It gives a comfortable secure grip to the switch.
-
Easy to install and Remove - It is easy to assemble. Simply put your joy-cons pop in and out quickly. Joystick thumb covers increase accuracy by adding extra height and radius. You will feel more comfortable with them while playing. It keeps your fingers from slipping.
Product Name
|
Crystal protective case For Nintendo Switch console and Joy-Cons
|
weight
|
97.6(with box)
|
MOQ
|
100
|
Color
|
Transparent,Transparent Red ,Transparent,Blue Pink or OEM
|
Function
|
Protect your Switch Console
|
case size for console
|
17.2*10.4*1.8CM
|
case size for joy-cons
|
10.5*3.5*2.3CM
|
Box Size
|
18*11*3.2
|


Nintendo Switch Crystal Case,Nintendo Switch Transparent Cover,Switch Protector Case,Crystal Transparent Case For Switch
Shenzhen GEME electronics Co,.Ltd , https://www.gemeelectparts.com