Simple 8 strokes can effectively improve your WiFi signal
Everyone only knows that the better the quality of the router, the stronger the ability to transmit wifi signals. But in fact, what everyone doesn't know is that the router also has a spleen "device", not taking care of the temper of your router, but there is no good wifi.
How to take care of the router's temper? And look at the small series to see the move, a move to improve their own wifi
Move one:
The ugly router doesn't like to lie in the corner and draw a circle! Many people think that the router will affect the overall beauty of the room, like to put behind the TV cabinet.
If you want the strongest signal, it's best to place it in a space that is not blocked by walls or obstacles. Experiments have shown that routers that are not tied can better perform their fists!
If it is a duplex or a three-bedroom or two-bedroom apartment, the router is best located in the center of the house to cover all the high-quality wifi signals to every corner of the home.
Move 2:
The router not only needs to be in a luxury location of the sub-center of the housing, but also does not like to be disturbed.
Mobile phones, wireless phones, microwave ovens, appliances with wifi modules, and even neighboring routers can interfere with the signal.
You can use a dual-band router to handle this problem, and you can also use other bands of wireless phones.
Of course, if you do not want to re-purchase dual-band routing, it is best to move the wireless router peripheral interference appliances far away.
Move three:
The picky router, the ears (antennas) must also be straight. Most wireless routers are equipped with omnidirectional antennas that have "circular" stereo coverage.
Therefore, in the vertical direction, the wifi signal covers a wider area.
In addition, when the antenna of the router is placed in the vertical direction, the signals above and below the signal are weak points of coverage. In actual use, the appropriate angle can be selected according to the distance and height used.
The facts also prove that the signal transmission technology of dual antenna or multi-antenna router is much better than single antenna.
Move 4:
DIY routers are more powerful! The most popular DIY method is to use a can to enhance the signal.
The method is simple: cut the bottom of the can, cut the entire bottom, and then unfold the cans to pass the router antenna through the can.
If there is an old router that has been eliminated at home, follow the instructions to set the old router to AP mode, and then connect to the router currently used at home through the LAN port, which can also expand the wifi signal at home.
Move 5:
The router is elegant, but it doesn't pick the channel at all. When using a wireless router, the router usually has a default channel, which is perhaps the most congested. Moreover, basically every household has a wireless router installed, and these routers will interfere with each other, causing channel congestion and poor signal quality.
But in fact, there are many router channels, you only need to change the channel in the router settings, switch your own wifi channel to a less congested channel.
The method of modifying the channel, I have also written before, please move with interest: too much wireless signal is disturbed? Teach you to modify the wireless channel and increase the speed!
Move 6:
Do not like to work overload, the router should also rest. The router works for a long time, it will overheat, aging, excessive download, etc., resulting in reduced signal coverage.
You don't need too much rest time, just set your router to automatically restart every day (many firmware or timing software has this feature), the router after a little rest can make your wifi faster and more stable!
Move seven:
The router has the potential to wait for his Bole...
After the wireless router is installed, power on, enter the security settings, set the router speed to maximum, and set the router to use only one 802.11 protocol.
Most routers are factory set to run at 75% speed, and many routers are set to mixed mode. When adjusted to a single protocol, the rate can be significantly increased.
Move 8:
For a router that is afraid of being alone, with a power cat. Together, even more powerful!
This method is suitable for homes with large space or multiple floors. Usually, the wifi signal is difficult to cover. At this time, an extra power cat is provided, the network signal is adjusted to the wire, and the existing wire is used to solve the network transmission.
Connect a power cat to the router through the network cable, then turn on the power, and realize power line carrier communication on the same meter. I want to surf the Internet wirelessly in other rooms, and then plug in a wireless power cat.
Multifunctional High Speed Blender,Mute Wall High Speed Blenders,Household High-Speed Blender,Good High Speed Blender
JOYOUNG COMPANY LIMITED , https://www.globaljoyoung.com