ON Semiconductor further strengthens its lineup of automotive certification products
August 4, 2015 - ON Semiconductor (ON Semiconductor, NASDAQ: ON), which promotes energy-efficient innovation, introduces a new line of integrated circuits (ICs) that comply with the AEC-Q100 standard for optimization Next generation car design.
NBA3N200/1/6S Multipoint Low Voltage Differential Signal Transmission (M-LVDS) Linear Driver/Receiver Series Operating Power 3.3 V. NBA3N200S and NBA3N201S support up to 200 megabits per second (Mbps) signal transmission rate, common mode voltage range
-1 V to 3.4 V. These devices have Class 1 (Type-1) receivers that detect bus state with differential input voltages outside the common-mode voltage range as low as 50 millivolts (mV). The differential input voltage hysteresis of 25 mV at the receiver prevents oscillations at the output due to slowly varying input signals or input losses. The NBA3N206S also uses a Category 2 (Type-2) receiver with a threshold of 0.1 V to support a signal transmission rate of 200 Mbps. The Class 2 Receiver's Offset Voltage Threshold feature detects open circuits, idle buses, and various other fault conditions that could damage the system. These devices are used in automotive applications such as pixel headlights, especially for data transmission between the LED headlight control unit and the headlights.
The 140 mV rated dual output linear regulator NCV8154 has an input voltage range of 1.9 V to 5.25 V and has two independent input voltage pins. The device is highly optimized for powering radio frequency (RF) modules in automotive infotainment systems, providing very stable and extremely accurate voltages with ultra-low noise and high power supply rejection ratio (PSRR). The Low Dropout (LDO) regulator NCV8170 is designed for portable battery-powered applications, such as automotive keyless entry systems, which typically consume only 500 nanoamps (nA). Moreover, dynamic transient enhancement enhances the transient response of the device. The NCV8715 is a 50 mA high stability LDO with an input voltage of up to 24 V and a ground current consumption of 4.7 mA (uA) over the full output load range. This device is ideal for automotive grade microcontroller units. The NCV8154 / NCV8715 / NCV8170 offer thermal shutdown and current limiting protection to ensure reliable operation.
The company also offers a single N-channel MOSFET that provides incredibly low on-resistance values ​​to minimize conduction losses and improve overall operating efficiency. The MOSFETs NVMFS5C404NL, NVMFS5C410NL, NVMFS5C423NL, and NVMFS5C442NL rated at 40 V typically have on-resistances of 0.56 mΩ, 0.71 mΩ, 1.6 mΩ, and 2.2 mΩ at 10 V. Complementing these devices are the 60 VNVMFS5C604NL, NVMFS5C612NL, NVMFS5C646NL, and NVMFS5C670NL, with typical on-resistance values ​​of 0.93 mΩ, 1.2 mΩ, 3.8 mΩ, and 5.1 mΩ at 10 V. These devices extend ON Semiconductor's broad lineup of MOSFETs for power switches, load switches, motor control and other automotive applications.
Package and price
The NBA3N200S, NBA3N201S and NBA3N206S are available in SOIC-8 packages and are priced at $0.73 per unit in 10,000-piece quantities. The NCV8154 is available in a DFN-10 package and is priced at $0.14 per unit in 10,000-piece quantities. The NCV8715 is available in an xDFN-6 package and is priced at $0.12 per unit in 10,000-piece quantities. The NCV8170 is available in xDFN-4 and SOT-563 packages and is priced at $0.125 and $0.13 per unit in 10,000-piece quantities. NVMFS5C404NL, NVMFS5C410NL, NVMFS5C423NL, NVMFS5C442NL, NVMFS5C604NL, NVMFS5C612NL, NVMFS5C646NL, and NVMFS5C670NL are all available in SO-8FL packages and are priced from $0.35 to $1.78 per unit in 5,000-piece quantities.
About ON Semiconductor
ON Semiconductor (Nasdaq: ON) is committed to driving innovation in energy-efficient electronics, enabling customers to reduce energy use worldwide. Leading Semiconductor's semiconductor-based solutions provide a comprehensive line of energy-efficient power and signal management, logic, standards and custom devices. The company's products help engineers solve their unique design challenges in automotive, communications, computing, consumer electronics, industrial, medical, and military/aerospace applications. The company operates a keen, reliable, world-class supply chain and quality program, and operates a network of manufacturing facilities, sales offices and design centers in key markets in North America, Europe and Asia Pacific. For more information please visit http://.
Usb C Cable is also known as Usb Cable Type C interface,is an interface specification consisting of a Type-C plug and a type-C socket.Its highlights are thinner design,faster transmission speed (up to 10Gbps),stronger power transmission (up to 100W).In addition, USB-C interface also supports double-sided insertion,front and back can be inserted at will, compared with USB2.0/USB3.0 more advanced.Usb-c has been given better media properties,faster transfer speeds,and better compatibility with charging.The new generation USB-C has faster transmission speed than USB,stronger power transmission, smaller interface size,and supports bidirectional transmission with stronger compatibility.
Thinner bodies require thinner ports,which is one of the reasons USB-C is here to stay.The USB-C port is 0.83 cm long and 0.26 cm wide.The old USB port measuring 1.4cm long and 0.65cm wide looks outdated.This also means that the end of USB Cable will be one-third the size of the plug of A standard USB-A cable.The USB-C port is the same on the front and back.This means that no matter how you insert the port,it will be correct.Users do not have to worry about the pros and cons of traditional USB ports.
Usb C Cable,Custom Usb C Cable,Flexible Usb C Cable,Braided Coiled Usb C Cable
Henan Yijiao Trading Co., Ltd , https://www.yijiaousb.com